[. . . ] COUVERTURE ARRIÈRE W10728576A REFRIGERATOR SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING. [. . . ] If you want the door to open from the other direction, you must reverse the door swing. IMPORTANT: ■ Before you begin, turn OFF the refrigerator control, unplug the refrigerator or disconnect power. Using a hex-head socket wrench, remove the four ⁵⁄₁₆" hex-head hinge screws from the bottom hinge and pull the hinge from the bottom of the refrigerator door. Depending on your model, your refrigerator has either Style 1–Contour Doors or Style 2–Standard Doors. Reference the graphic specific to your model later in this section following “Final Steps. € NOTE: A Reversibility Kit, which includes a new Brand Badge and hole covers, is available. Using a hex-head socket wrench, remove the three ⁵⁄₁₆" hex-head hinge screws from the top hinge and lift up to remove the hinge. NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working. 6 Reverse Freezer Door Reverse Doors and Hinges (optional) IMPORTANT: If you want to reverse your doors so that they open in the opposite direction, follow these steps. If you are not reversing the doors, see “Replace Doors and Hinges. Using the screw removed earlier, fasten the door stop to the bottom of the freezer door. Depending on your model, place the handle on the shoulder screw and push the handle toward the door until the mounting base is flush against the door. Remove the plug covering the hole on the opposite side of the door, where the refrigerator door handle will be installed, and discard the hole plug. Depending on your model, remove the shoulder screw and its washer from the left-hand side of the door and fasten it into the hole that was behind the cap. Depending on your model, place the handle on the shoulder screw and push the handle toward the door until the mounting base is flush against the door. Fasten the top of the refrigerator handle to the top of the refrigerator door. Set aside the freezer door until the hinges and refrigerator door are in place. Replace the door stop on the opposite side of the refrigerator door, making sure that the hole in the door stop plate is aligned perfectly with the hole for the bottom hinge pin. door Handles Installed with Flat-head Screws and Setscrews ■ ■ ■ 9. Pull the handle away from the door to release it from the shoulder screw. Set aside refrigerator door until bottom hinge is installed on the opposite side of the refrigerator. [. . . ] ■ Vegetables with skins: Place in plastic bag or plastic container and store in crisper. HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables. – Leafy vegetables: Wash in cold water, drain and trim or tear off bruised and discolored areas. Frozen Food Storage Guide Important information to know about glass shelves and covers: Do not clean glass shelves or covers with warm water when they are cold. [. . . ]